An IT company requires with the following requirements: 1-2 years’ experience in IT field, Relevant university degree, Arab nationality with age not to exceed 30, Driving license, email: Resumes with latest photograph to new-jobs-75@hotmail.com
-------------------------------------
مطلوب ( معلم عصير + جرسون ـ براتب مغري ) لمحل عصير في منطقه الاندلس ـ ت: 97503535
-------------------------------------
Required Office Manager for GM Office in trading & Contracting division
( The vacancy only for ladies)
High Experience
Address : Salmiya
Working hours : 8:00 Am till 5:00 Pm
Off Days : Fridays & Saturdays
Email: funky_crminald@hotmail.com
-------------------------------------
An African Embassy in Kuwait need a Translator,who can translate Arabic to English and vice verse.Salary range KD 250 -KD 280 depends on the experience.Email:Careers.emb.lr@gmail.com.Please consider my request.Thanking You,Asha
-------------------------------------
Project Management company is hiring
Audio Visual Engineers
3-5 years’ experience working on construction projects, with an emphasis working as an Inspector at work sites. Must have a University degree and license. Efficient in both Arabic and English is preferred. Willing to travel outside of Kuwait for any period of time.
Architect Engineers
3-5 years’ experience working on construction projects, with an emphasis working as an Inspector at work sites. Must have a University degree and license. Efficient in both Arabic and English is preferred. Willing to travel outside of Kuwait for any period of time.
Send your CV to: jobs@makhpiya.com
-------------------------------------
Medical representative vacancy.
Requirements:
- Bsc pharmacy
- 0-2 years experience
- knowledge in kuwait market
- transferable visa
- kuwaiti driving license
- join immediately
Please send your cv to: melhem-joseph@hotmail.com
-------------------------------------
مطلوب لشركة عقارية فني تكييف ـ ت: 97644802
-------------------------------------
A major Kuwaiti shareholding company is looking for
SAFETY OFFICER
- Diploma in Safety
- 3 years experience in Safety field
- Experience in conducting safety training
- Ability to read technical drawings
- Knowledge of fire protection systems
MALE SECRETARY
- University graduate with Secretarial Training course.
- 5 years experience.
Both positions should have fluency in English, basic knowledge of Arabic language & excellent knowledge in MS Office.
Positions are open to all nationalities, Kuwaiti nationals will be given preference.
Send your cv to fax: 22432956 / 22440896
or email to: kscrecruit@gmail.com
-------------------------------------
Program Manager
- Minimum of 10 years Program Manager Experience.
- Minimum of 5 years Military communications networks experience.
Operation Manager
- Minimum of 10 years management, installations & testing experience
- Minimum of 5 years Military communications networks experience.
Engineering Manager
- Minimum of 10 years Management, Design & Engineering experience.
- Minimum of 5 years Military communications networks & system integration experience.
Send your CV to email: kuwaitjob_28@yahoo.com
-------------------------------------
Leading EPC company requires urgently
CIVIL CONSTRUCTION ENGINEER
For project management consultancy
- Graduate in Civil Engineering
- 8 years experience with key RCC & Steel construction works in Oil sector
- Transferable visa
- Should be conversant with English & Arabic Languages
Send your CV to email: hrfuturepc@gmail.com
-------------------------------------
A leading engineering consultant firm is looking for :
Materials & Quality Inspector
- Diploma in Civil Engineering or Equivalent
- 10 years experience in the sampling and testing of construction materials associated with ports/marine dredging and reclamation works with at least 5 yeas working experience in middle east.
Send your CV to fax: 22454647 or email: sec@sief.fasttelco.com
-------------------------------------
We are looking to fill the positions of:
Customer Service Representative
- Internal and external customer support
- Product & Application questions
- Walk-in customers, pricing inquiries/verbal request for quotations
- Processing orders, delivery queries, stock availability
- Handle all customer complaints & queries
- Provide high level service while building long customer relationships
- 2-3 years previous customer service experience
- IT literature (email, MS Office applications)
- Bilingual: Proficient in English and Arabic an advantage
Only applicants with transferable residency will be considered.
Send your CV to email: hr@hiltikuwait.com before 31st July 2012.
-------------------------------------
A leading contracting co. looking for sales persons.
who have experience in selling flooring and finishes items.
- Driving License, Transferable residence and having car is a must.
Send your cv to fax: 24611039
-------------------------------------
مطلوب حارس لشالية اقامة قابلة للتحويل ارسال السيره فاكس22456085 ـ bubiyan_fisheries@hotmail.com ـ ـ ت: 22456086
-------------------------------------
Nurses(GNM ) from Delhi / NCR for the following specialization areas: OT Labour Room NICU Service charges applicable.4-10 yrs of exp
B.sc
send your Cv to: ritu@seamlessstaffing.com
-------------------------------------
مطلوب موظفات استقبال للعمل في عيادة أسنان خاصة أعمارهم 21 وما فوق وأقامة قابلة للتحويل للاستفسار يرجى الاتصال على هذا الرقم 25733414-97900666
-------------------------------------
Networking technician required for a leading company on communication have good experience on networking, and must have valid Kuwaiti driving license and transferable Visa.
Please send your resume to: job_vacancy_2012@hotmail.co
-------------------------------------
looking for 3D &Graphic Designer with experience in design and drawing work as a designer models in big company, preferably graduate of the Faculty of Art
مطلوب مصمم يكون لدية خبره بتصميم موديلات للعمل بشركة كبرى
الاعلان للرجال فقط
send CV TO : sales@niceramics.net
-------------------------------------
مطلوب موظفات تسويق عن طريق التليفون للسلسلة فنادق و مطاعم عالمية .
المؤهلات المطلوبة :
شهادة جامعية
حسن المظهر
شخصية طموحة
القدرة على العمل تحت ضغط
المميزات :
مرتب ثابت + عمولات مغرية جدا
تدريب على ايدى متتخصصين
فرص للترقى
قترة دوام 5 ساعات فقط
لمزيد من الاستفسار يرجى الاتصال على رقم 50663949
-------------------------------------
مطلوب مسوقين ومسوقات لشركة حلول شبكات وصيانه براتب وعموله مغريين
required for a network solutions company and IT marketing personnel
من الكويت فقط
only from kuwait
h.qato@theassistantco.com
-------------------------------------
Recruitment Officer/ Senior Officer
send your resume to Careers@abyatonline.com
-------------------------------------
*****URGENTLY HIRING JOBS--Labors *************
OPEN INTERVIEW START ON 14/7/2012 Untill 19th Jul
Salary is Negotiable
Accommodation+transporting +other company fringe benefits as per the company by law,
Any Nationality and transference visa 18 only
Please send your CV info@isiskuwait.com and hr@isiskuwait.com And call our number 22490910/11-Office Location ISIS OFFICE, 5th FLR, Abeer tower, Jaber mubarak street, Sharq
-------------------------------------
Instrument Techncian - IMCO Engineering / Construction Company
The objective of the position is to carry out activities related to repair, services and calibration of wide ranges and various types of pneumatic.
1. Shall carry out preventive, corrective and breakdown maintenance of DCS, SCADA, and PLC.
2. Shall carry out activities related to repair, services and calibration of wide ranges and various types of pneumatic.
Skills
1. Diploma in instrumentation engineering.
2. 6+ years of work experience electrical equipment maintenance, at least 2+ years in lead technician capacity
3. Knowledge of DCS, SCADA, PLC and HMI systems.
Good Organizational skills
Good time management skills
Good follow up skills
Good Communication skills
Send CV at: hr@imcokw.com
-------------------------------------
Graphic Designer Online - Kuwait United Company
Responsible for conceptualization, layouts and design of graphics for New Media Division and production
Key Accountabilities
-Develop concepts for and design all “New Media” collateral materials, including direct mail, and ads, postcards, newsletters, flyers, and invitations as needed
-Develop look, feel and presentation of all company projects, online and print
-Prepare work to be accomplished by gathering information and material
-Plan concept by studying information and material
-Illustrate concept by designing rough layout of art and copy regarding arrangement, size, type size and style, and related aesthetic concept
-Obtain approval of concept by submitting rough layout for approval
-Prepare finished copy and art
-Prepare final layout by marking and pasting up finished copy and art
-Manage Web site design updates while maintaining look and feel
-Manage and maintain graphic files, including logos, photos and art
- Maintain technical knowledge by attending design workshops; reviewing professional publications
participating in professional societies
-Contribute to team effort by accomplishing related results as needed
Qualifications Required
1.University degree in Graphic and Web Design
2.A minimum of 2-3 years in similar role
3.Fluent in Arabic & English
4.Ability to work under pressure & deadline oriented
5.Creativity
6.Need to be media savvy and open to new ideas
7.Familiarity with the latest computer design software and graphics: Adobe CS Suite (Photoshop, Illustrator, Indesign & Acrobat), Flash, and motion graphics
Send CV at: jobs@kuc.com.kw
-------------------------------------
Rotating Equipment Mechanic - IMCO Engineering
Performs a variety of mechanical craft jobs including complex jobs, in shop/field required in installation, maintenance & repair of rotating equipment & auxiliaries such as pumps, compressors, turbines, blowers, fin-fans, mixers, gas engines, etc. a variety of testing equipment & measurement tools.
2. WORK PERFORMED
1. Receives assignments from the immediate supervisor, obtains materials from warehouse or shops. Prepares work site, receives work permit and secures safety conditions prior to work.
2. Performs a variety of jobs including shop/field installation, maintenance & repair of rotating equipment & auxiliaries such as pumps, compressors, turbines, blowers, fin-fans, mixers, gas engines etc.
3. Installs rotating equipment including those requiring non-standard installation procedures. Makes necessary alignment/adjustment to ensure correct operation.
4. Removes & dismantles equipment with maintenance problems; cleans & lubricate; repairs/replaces faulty components; reassembles units and checks for efficient operation. Performs preventive & breakdown maintenance jobs.
5. Uses a variety of testing equipment to diagnose trouble in proper sequence. Also, uses tools such as hydraulic press, pullers, electric drills, grinders, heating torch as well as precision tools such as micrometer, caliper gauges & dial gauges for test-checking or repair work.
6. Performs/ensures maintenance work in accordance with instructions, drawings and codes of practice. Reports any abnormal condition of equipment under repair/overhaul to his supervisor.
7. Performs all compressor valve & seal lapping jobs using lapping machines & other test equipment.
8. Implements/practices good housekeeping, performs job site clean-up duties, as required, and complies with establishment fire and safety regulations.
9. Assumes full responsibility for the role as envisaged by Safety, Health and Environment Management System (SHEMS), as per the attachment.
10. Performs any related duties as assigned.
Skills
1. Twelve (12) years of schooling followed by formal apprenticeship training in Machinery work.
2. Minimum Eight (8) years of hands on experience in overhauling and maintenance of Rotating Equipment Such as:
• Single stage overhung centrifugal pumps.
• Multi stage centrifugal pumps horizontal and vertical.
• Centrifugal compressors and reciprocating compressors.
• General purpose and special purpose steam turbine.
• Repair of Mechanical Seals.
3. Maintenance skills on safety/ relief valves.
4. Skills in the use of hand tools, power tools and measuring instruments
5. Ability to read, write and speak in English.
6. Capable of group communications, oral/written.
Send CV at: hr@imcokw.com
-------------------------------------
Rotating Equipment Supervisor - IMCO Engineering / Construction Company
A. Supervises, schedules and directs activities of assigned personnel engaged in rotating equipment maintenance work in shop/field.
B. Supervises various maintenance, testing & overhauling jobs on rotating equipment & auxiliaries; such as. Pumps, compressors, turbines, blowers, fin-fans, mixers, gas engines, etc.
C. Typical operations include dismantling of rotating equipment, inspecting internals, assessing equipment condition for parts replacement / repair, reassembling & test-checking.
D. Assists Engineers, Rotating Equipment in execution of modification & installation work. Checks work until completion to required standards. Checks manning levels. Assists in supervision of assigned rotating equipment projects.
E. Investigates cases of inadequate performance & repetitive malfunction of rotating equipment & auxiliaries; consults with operating personnel on problems related to rotating equipment; and recommends solutions/improvements. Also, inspects critical rotating equipment; such as, centrifugal, reciprocating compressors, turbines, feed pumps, gas engines, etc. and ensures their trouble free operations.
F. Exposure to condition monitoring techniques .
G. Participates in commissioning/start-up operation. Performs personally, complex / sophisticated maintenance jobs on critical equipment.
H. Ensures proper implementation of work procedures & standards. Also, initiates requisitions for spares & materials required of rotating equipment maintenance jobs; and ensure their economical utilization. Ensures routine maintenance of equipment & tools.
I. Supervises contractors’ personnel on rotating equipment maintenance jobs and ensures implementation of contracts according to prescribed terms & conditions. Requests for hot and cold work permits. Interviews contractors’ Forman & Technicians for suitability.
J. Ensures that all record documents, drawings & history cards are maintained up-to-date. Provides on-the-top training to Trainee Mechanics. Ensures/implements good housekeeping and adherence to fire & safety regulations.
K. Assumes full responsibility for the role as envisaged by Safety, Health Environment Management System (SHEMS), as per the attachment.
L. Performs any other related duties as assigned.
A. HNC / Diploma in Mechanical Engineering
B. Minimum Ten (10) years experience as supervisor plants in the filed of maintenance of Rotating Equipment such as.
• Process gas compressors (centrifugal and reciprocating)
• Steam Turbines of extraction type, condensing type, Back pressure types.
• All types of centrifugal & reciprocating pumps.
• Basic knowledge on I.C. engines is preferable.
C. Trouble shooting skills in Hydraulic Systems and solid handling systems are preferable.
D. Ability to handle more than one critical jobs at a time.
E. Familiar with the usage of all measuring and monitoring instruments
F. Basic knowledge on utility software on computer such as MS Word. Excel.
G. Read, write and speak in English fluently.
Send CV at: hr@imcokw.com
-------------------------------------
Biomedical Service Engineer - ELM Trading Company
• All Engineering Works including and not limited to Installations, Commissioning, Service and Maintenance, training, Technical presentations etc. of healthcare/medical, clinical equipment and Scientific/Research equipment
• Contact potential clients with relevant Sales team to assess their individual needs and demonstrate how Company's products can meet or exceed these needs and Participating in growth activities to support overall business objectives and plans
• Flexibility to work long and unpredictable hours to match maintenance schedule and requirements of the client
• Liaising with technicians and manufacturers to ensure the feasibility of a product in terms of design and economic viability
• Assessing the potential wider market for products or modifications suggested by health professionals or others
• Arranging clinical trials of medical and Scientific/Research products
• Preparing reports, presentations and attending conferences/exhibitions to present the latest equipment, product to a range of technical and non-technical audiences
• Meeting with senior health service staff or other managers to follow up the performance of ELM supplied products
• Dealing with technical queries from all the clients from above mentioned product range and giving advice on new equipment
• Keep abreast with the latest national and international medical developments in the respective field
• Evaluate the safety, efficiency, and effectiveness of ELM supplied products
• Keep documentation and records of service histories and schedule maintenance on ELM supplied products
• Conduct training or in-services to educate clinicians and other personnel on proper use of equipment
• Write Service & Maintenance manual comprising of protocols, policies, standards for use, maintenance, and repair of ELM supplied products
• Conduct preventative maintenance on equipment according to the client's requirement and schedule
• Manage team of technicians by creating schedules, tracking inventory, creating and using budgets, and overseeing contract obligations and deadlines
• Qualification: Graduate in Biomedical / Electrical / Electronics Engineering
• Experience in installation /servicing / maintenance of various laboratory / medical equipment.
• Liaise with client for various needs, coordinate with sales team etc
Send CV at: elm@elmkw.com
-------------------------------------
Digital Graphic Designer - Kuwait United Company
Responsibilities:
-Project management of complex design requests from concept through to delivery
-Work with marketing team to develop and strengthen the project’s brand equity.
-Design and develop strong, impactful and commercial creative ideas that can be applied across a range of media channels including: print based promotional material, email campaigns, web banner etc......
-Abide by and sign off all conceptual designs from Group Creative Director.
Skills:
-A minimum of 3 years experience as a graphic designer in the following areas: Interactive, agency creative, and graphic design
-Minimum of two years of experience in Web design and online marketing
-Fluency in current graphic design practices and web production software, such as Adobe Photoshop, Adobe Illustrator, Adobe After Effects
-Ability to create superior, original designs for the Web and Print that are compatible with relevant technology platforms
-Strong design style, including creative design solutions within the constraints of the Internet
-Strong conceptual skills, including online software concepts and online experience concepts
-Knowledge of how web-based technologies apply to web design such as HTML, Flash, CSS, and AJAX
-Knowledge of Web site structure and functionality
-Understanding of corporate branding, layout, colour theory and typography in both print and digital media
Send CV at: jobs@kuc.com.kw
-------------------------------------
Instrument Techncian - IMCO Engineering / Construction Company
The objective of the position is to carry out activities related to repair, services and calibration of wide ranges and various types of pneumatic.
1. Shall carry out preventive, corrective and breakdown maintenance of DCS, SCADA, and PLC.
2. Shall carry out activities related to repair, services and calibration of wide ranges and various types of pneumatic.
Skills
1. Diploma in instrumentation engineering.
2. 6+ years of work experience electrical equipment maintenance, at least 2+ years in lead technician capacity
3. Knowledge of DCS, SCADA, PLC and HMI systems.
Good Organizational skills
Good time management skills
Good follow up skills
Good Communication skills
Send CV at: hr@imcokw.com
-------------------------------------
تعليقات
إرسال تعليق